Fitting Type

Recess

Recess Measurement

Select this option if you intend to fit the blind on the inside of the recess, please ensure you provide us with the exact measurements and we will allow for the necessary tolerances

Recess Width

Take 2 or 3 measurements for the width of the recess
from wall to wall as shown in the picture. Write down the shortest measurement.

We will make the necessary deduction of 12mm for the fitting and brackets to ensure the blind operates perfectly within the window recess.

Recess Drop

Take 2 or 3 measurements for the drop of the window recess (heads to sill) as shown in the picture.

Take the smallest of these measurements. This is the recess drop.

We will make the necessary deductions for the fittings & brackets to ensure the blind operates perfectly within the window recess

Exact Blind Measurement

Exact Blind Measurement

Select this option if you intend to fit the blind on the outside of the recess overlapping the window.  In this case we will make the blind to your specified dimensions with no deductions .

Exact Blind Width
Decide how much you wish to overlap the recess at each side. We recommend at least 70mm each side to minimise light leakage
Take the overall width measurement including the overlap. This is the Exact Blind Width.

Exact Blind Drop
Decide how much you wish to overlap the recess at the top & bottom. We recommend at least 70mm at the top if the blind is required to roll up fully above the window recess.

Take the overall drop measurement including the overlap. This is the Exact Blind Drop.

Close Window